2.0.0.46 (21.04.2008)

• Imp: Names of driver instance for CtiServer grouping added
• Imp: Control Line added
• Imp: Add and removal of lines via Control Line
• Imp: License administration according to opened lines
• Imp: Compatibility with OpenOffice MULAP devices
• Fix: Hicom 300H with CAP harmonized - call diversion and DoNotDisturb
• Fix: Do not disturb functions
• Fix: Set Display
• Fix: Memory and Handle Leak

2.0.0.40 (13.11.2007)

• New: Redirect has its own thread (asyncron)
• Fix: Improvement of several call-features
• Fix: blindTransfer - ConsultationCall not displayed anymore
• Fix: Conference connectionID of Conference Controllers is available

V2.0.0.37 (24.08.2007)

• New: CSTA phase 3 driver for HiPath is renamed to ECSTA for HiPath 2000/3000/5000
• New: Hipath 3000 V7 is supported by ECSTA for HiPath 2000/3000/5000
• New: ECSTA for Hicom 150/Hipath 3000 does not support HiPath 3000 V7

2.0.0.35 (14.05.2007)

• Fix: Line open problem fixed
  
• Fix: “User to User” problem fixed
  

2.0.0.33 (12.03.2007)

• Fix: Delayed status messages with HiPath 3800 corrected
• Fix: ECSTA 2.0 import via .txt-file improved
• Fix: Hipath 2000 CSTA phase 3 implemented
• Fix: Redirection adapted for MULAP-groups
• Fix: Adaption for multiprocessor-systems
• Fix: ECSTA 2.0 is now 64bit compatible

V2.00.05 (24.02.2004)

• ADD: revised help files
• ADD: revised installation process
• ADD: Octopus E300/E800 SA8818 protocol added for agents
• ADD: Octopus E300/E800 configuration adapted

V2.00.00 (03.12.2003 - Renamed into ESTOS ECSTA 2.0

• ADD: Supports Telekom Octopus E300/E800
  
• ENH: New Help file
  

V1.0.0.28 (01.03.2003)

• ADD: Hipath 3000 series advanced CSTA error handling now implemented.
• ADD: Multiple installations of the driver now supported.
• ADD: New Advanced Control panel applet included - Supports multiple installations on 'non-Server' operating systems.
• ADD: Help file now as windows html help.
• ENH: etapi150 sample project now with some more error handling.

V1.0.0.24 (14.02.2002)

• ADD: CallerID after call transfer now available.
• ADD: ConnectedID after call transfer now available.
• ADD: Ghost call when not successfully camped on is now ignored.
• ADD: MULAP (Chief / Secretary) devices may now be monitored.

V1.0.0.18 (25.06.2001)

• ADD: It´s now possible to choose which capi controller to use.
• ADD: It´s now possible to choose which capi2032.dll to use.
• FIX: Problems with callforwarding state (donot disturb)

V1.0.0.16 (30.05.2001)

• ADD: Finally released for Hicom 150 H 1.0
• ADD: TCP/IP Connection via XPress@LAN

V1.0.0.13 (20.03.2001)

• ADD: OverrideMediamode: Call monitoring now possible even without settings the correct mediamode (Fix for Ositron)

V1.0.0.11: (22.02.2001)

• FIX: Corrected LINEDEVSTATUSFLAGS_
• ADD: lineSetLineDevStatus: LINEDEVSTATUSFLAGS_INSERVICE deallocates all calls on the line device
• ADD: LINEDEVSTATUSFLAGS_INSERVICE
• ADD: Multithreaded lineopen calls now supported
• ADD: Additional number formating

V1.0.0.10: (14.02.2001)

• ADD: Advanced Error messages when connecting to Hicom

V1.0.0.9: (30.01.2001)

• FIX: Charging multiplication problems
• ADD: Support for Firmware HE520 (SnapShotDeviceResult)

V1.0.0.8 (17.01.2001)

• ADD: Support for Hicom 150 Release 3.0
• ADD: Phone number formatting for incoming and outgoing phone numbers
• FIX: Problems with consultion calls fixed

V1.0.0.5 (05.12.2000)

• ADD: Added charging multiplicator
• IX: Problems with conference calls